DUMP TRAILER Power UNIT-DOUBLE ACTING
This power unit features a energy up energy down circuit with load holding on the two A & B ports. A pressure compensatred flow manage might be extra to circuit to control the decent speed on the cylinder.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean every one of the hydraulic elements concerned prior to installation of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which should also be clean and totally free of impurities. N46 hydraulic oil is advisable.
4. The power unit needs to be mounted horizontally.
5. Check the oil level in the tank soon after the initial working with the energy unit.
6. Oil modifying is required following the preliminary one hundred operation hours, afterwards as soon as every 3000 hours.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This electrical power unit features a electrical power up gravity down circuit. Start off the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve might be supplied if needed. Also a pressure compen sated movement manage is usually additional on the circuit to manage the descent velocity of the cylinder.
Remark: Please seek the advice of our revenue engineer for that distinctive pump displacement, motor power or tank capacity.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned before set up of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which need to also be clean and free of charge of impurities.N46 hydraulic oil is suggested.
4. The electrical power unit needs to be mounted horizontally.
5. Check the oil level while in the tank soon after the preliminary working in the power unit.
six. Oil shifting is required just after the first one hundred operation hrs, afterwards the moment every single 3000 hrs.