January 13, 2021

Any damage on the teeth surfaces of a sprocket diminishes the life of the conveyor chain.
With standard sprockets, considerably worn sprocket teeth have been repaired by teeth padding or the complete sprocket was replaced. In both case, restore was expensive and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our buyers for that dramatic financial savings in cost and time.
The teeth can be replaced by two strategies: individual tooth substitute or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on for the sprocket are spot-welded to stop loosening.
The respective structures are illustrated to the right.
The above photo along with the top rated right illustration show a sprocket for person tooth substitute. Since the joint face involving the replaced teeth as well as sprocket is formed within a distinctive arc, the bonding accuracy is high and also the sprocket strength is enhanced. Moreover, since the load acting on the mounting bolts is decreased, there’s much less possibility of loosening. This sprocket construction is patented.
You’ll find two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for large sprockets obtaining heavy loads and welded sheet steel hubs for other applications.