ep

January 18, 2021

Common Description
Equipped with the zero leak bidirectional checking sole-noid valves, this energy unit is developed for the operation of two independent circuits. Which are respectively for your major and subordinate platforms from the double scissors lift. Two cut-off valves are utilized for decreasing the machine manually in situation of power reduction. If extra independent circuits are required to your application please contact us for availability.
Remark: one. Please talk to our revenue engineer for the various pump displacement, motor power or tank capacity.
2. CSA or UL licensed motors are available on request.
Exclusive Notes
one. The AC motor is of S3 duty cycle, which could only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean every one of the hydraulic parts concerned in advance of installation of the electrical power unit.
three. Viscosity of your oil shoud be 15~46 cst,and also the oil need to be clean and no cost of impurities,N46 hydraulic oil is proposed.
four. The power unit must be mounted vertically.
5. Check the oil level while in the tank following the initial running with the power unit.
6. Oil altering is required right after the preliminary a hundred operation hours,afterwards the moment every single 3000 hours.